• 10 amp motor

• Metal-gear housing

• Soft grip handle and two-finger trigger

• 360° locking side handle with soft grip

• 0-1250 RPM, variable speed reversing switch

• 0-550 RPM

• 9.0 AMPS, 120V motor

• 3-position side handle

• 2-position rear spade handle

• Two-finger trigger

• High power motor

• Metal nose and gear case

• Helical-cut steel and heat-treated gears

• Versa-Clutch® torque adjustment system

• 3/8" Dr

• Powerful 8 Amp motor

• Delivers 0-2,500 rpm speed

• 7.0 amp motor

• Two-finger trigger

• 360° Side handle

• Variable speed

• Lock on trigger

• Includes: (1) Brushless Drill/Driver, (2) Li-ion Batteries, (1) Charger, (1) Kit Bag

• Ergonomic comfort grip handle

• LED light with 20-second trigger release delay

Includes:

• 20V MAX* XR Lithium Ion Brushless Hammerdrill

• (2) DCB205 - 20V MAX* XR® High Capacity Li-Ion Batteries (5.0Ah)

• Charger, Belt Hook, 360° side handle, Kitbox

Includes:

• (1) 3/8” Drill/Driver

• (2) 12V MAX* Lithium-Ion Battery Packs

• (1) Fast Charger

• (1) Belt Hook

• (1) Contractor Bag

• No-Spin shank eliminates the frustration of bit spinning in the chuck

• Tapered web provides greater durability to reduce breaking

• Size markings are located above the shank to prevent wearing away

• Pilot Point® Tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough

• 1/4” x 2” detachable nut driver

• Detachable nut driver design

• Magnet provides fastener retention for ease of use

• Engineered for use in impact drivers

• (20) - 1" Phillips Bits

• (8) - 1" Square Bits

• (4) - 1" Slotted Bits

• (2) - Nut Drivers

• (1) - Magnetic Drive Guide

• (2) - 2" Power Bits

• 400 ft-lbs of maximum torque

• Ergonomic handle

• Variable speed trigger

• LED light

• Tool ONLY

• Brushless motor

• 3-speed settings

• XR® Li-Ion batteries

• 3 LEDs with 20-second delay

• 1/4" hex chuck with easy grip sleeve

Includes:

• (1) 3/8” Dr Impact Wrench

• (2) 12V MAX* 2Ah batteries

• (1) Charger

• (1) tool bag

Includes:

• (1) DCD771 20V MAX* 1/2" Drill/Driver

• (1) DCF885 1/4" Impact Driver

• (2) 20V MAX* Lithium Ion 1.3 Ah Battery Packs

• (1) 20V MAX* charger, (1) Contractor bag

Includes:

• (1) Impact Wrench with Hog Ring Anvil Kit

• (1) Battery Charger, (2) 20V Batteries, (1) Kit Bag, (1) Belt Clip

Includes:

• (1) Impact Wrench with Hog Ring Anvil Kit

• (1) Battery Charger, (2) 20V Batteries, (1) Kit Bag, (1) Belt Clip

• Up to 300 ft-lbs of max fastening torque

• 450 ft-lbs of max breakaway torque

• Enhanced user control with 4 speed settings

• Fastener run-off with Precision Wrench™ control

• Tool Only

Includes:

• (1) DCD780 1/2" Drill/Driver

• (1) DCF885 1/4" Impact Driver

• (2) 20V MAX Battery Packs

• (1) Battery Charger

• (2) Belt Hooks, (1) Contractor Bag

Includes:

• (1) DCD996 20V MAX 3-Speed 1/2" Hammerdrill

• (1) DCF887 20V MAX 1/4" Impact Driver

• (2) DCB204 20V MAX Batteries

• (1) Battery Charger, (2) Belt Hooks

• (1) 360° side handle, (1) Contractor Bag

Includes:

• (1) Hammer drill, (1) Impact driver

• (1) Reciprocating saw, (1) Flashlight

• (2) 20V MAX* 5Ah batteries

Includes:

• (1) 20V MAX* Brushless XR® Oscillating Multi-Tool

• (1) 20V MAX* 2.0Ah Battery

• (1) Charger, (1) Wood With Nails Blade, (1) Fast-cut Wood Blade, (1) Universal Accessory Adaptor, (1) Sanding Pad, (25) Sheets of Sandpaper, (1) Accessory Storage Box, (1) Tool Bag, (1) Depth Guide

Includes:

• (1) String Trimmer

• (1) FLEXVOLT 20V/60V MAX* 3Ah Lithium Ion Battery

• (1) Charger

• (1) Auxiliary Handle

• (1) 0.080 in Prewound in the Spool

• Titanium Coating for Longer Life

• Patented Pilot Point Tip Starts on Contact

• Drill Bits: (2) 1/16", 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"

• PILOT POINT® bit tip starts on contact for clean, accurate holes

• Industrial strength cobalt

• 3 Amp Hour capacity provides extended runtime

• Includes Fuel Gauge 3-LED charge indicator

• Compatible chargers: DCB100, DCB101, DCB102, DCB103, DCB104, DCB107, DCB112, DCB113, DCB115, DCB119

• Designed to resist wear-and-tear

• Durable, over molded base provides impact resistance

• Long-lasting battery provides 2X lifetime

• 3-LED fuel gauge system

• No memory and virtually no self-discharge

• Premium XR® Lithium Ion pack

• 3-LED fuel gauge system

• No memory and virtually no self-discharge

• Weighs 1.42 lbs

• 6X runtime when used in a 20V MAX tools

• Compatible with all 20V MAX chargers

• Compatible with all 20V MAX, 60V MAX, and 120V MAX tools and products

• 20V/60V Max

• 9.0 Ah capacity

• 2 Pack

• Compatible with 20V MAX*, 60V MAX* and 120V MAX*

• Durable construction with single piece cell holder

• LED state of charge display

• 2 Pack

• Use with 20V MAX DEWALT charger

• 20V MAX batteries works in most 18V DEWALT tools

Includes:

• (1) 18V - 20V MAX* Adapter

• (2) DCB203 20V MAX* XR Lithium Ion Batteries (2.0Ah)

• (1) 12V/20V MAX* Charger

• Allows for use of 20V MAX* Batteries in most DeWalt 18V Tools

• Simultaneously Charges (2) DEWALT® 12V - 20V MAX* Li-Ion batteries

• Includes (2) USB ports to charge compatible devices

• Charges the batteries in 90 mins or less thus minimizing downtime

• 4-3/8" Drill travel

• Motor height adjustment

• Quick Change Chuck system

• Quick Release feed handles

• 10.0 Amp Motor with 2-Speeds

• Magnetic coolant bottle

• Quick-Change™ wheel release

• 2-position removable side handle

• 7 amp AC/DC, 12,000 rpm motor

• One-Touch™ guard Hex wrench

• 11 Amp AC/DC - 11,000 RPM

• Quick-Change ™ Wheel Release

• Paddle switch with safety lock-off

• Top mounted spindle lock button

• One-Touch ™ Guard

• Dust Ejection System

• No Lock-On Paddle switch

• Quick-Change wheel release

• 11 Amp AC/DC - 11,000 RPM

• One-Touch Guard allows

• 9 amp AC/DC

• 12,000 RPM motor

• 2-position, removable side handle

• Quick-Change™ wheel release

• Kickback Brake engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs

• E-CLUTCH^® shuts down the motor in under a tenth of a second when a pinch/stall is detected

• Tool Only

• Adjustable guard

• Rear handle design

• External brush caps

• High power-to-weight ratio

• 12 amp AC/DC, 10,000 rpm motor

• 13 Amps

• No lock-on

• Rat tail with kickback brake

• Brushless motor requires no brush changes

• 2-stage trigger requires two actions to activate tool

• Brushless motor requires no brush changes

• Brake stops wheel in 1 second or less on average

• The electronic Kickback Brake engages when a pinch, stall, or bind-up event is sensed

• POWER-LOSS RESET® - The ON/OFF trigger switch has a no-volt release function

• 2-stage trigger requires two actions to activate tool

• 13 Amp motor

• 9,000 RPM

• Anti-Rotation E-CLUTCH^® System

• Adjustable guard

• Rear handle design

• Spindle lock button

• 13.0 Amp AC/DC, 8,000 rpm motor

• Low-profile gearcase

• 2-position side handle

• Automatic turn-off brushes

• Epoxy coated field and armature

• High power 4 HP (8,500 rpm motor)

• 4.7 HP - 8,500 RPM

• Thick, "S" style cord

• 3-position side handle

• Dust Ejection System™

• Anti-vibe trigger handle

• Quick-Change™ guard

• High power 4.7 HP, 6,500 RPM motor

• Anti-vibe trigger handle

• Lightweight design (12.1 lbs)

• 9" grinding wheels

• 3-position side handle

• AC/DC power

• 4.7 HP - 6,500 RPM

• Thick, "S" style cord

• 3-position side handle

• Anti-vibe trigger handle

• Quick-Change™ guard

• Gear case grip for pipeliners

• 8,000 rpm motor

• 2-position side handle

• (2) 5.0 amp hour batteries

• Quick-Change™ Wheel Release

• 2-finger trigger switch w/ lock-off button

• 11,000 RPM Rating/13 Amp Motor

• Keyless adjustable guard

• Lock On paddle switch

• Vibration reducing side handle

• Quick-Change wheel release

• E-Clutch™

• 13 Amp - 11,000 RPM

• Dust Ejection System

• Power Loss Reset®

• Paddle Switch

• 13 Amp Motor

• 11,000 RPM Rating

• E-Clutch™

• Dust Ejection System

• 13 Amp - 11,000 RPM

• No Lock-on switch

• Dust Ejection System

• E-Clutch™

• 13 Amp Motor, 9,000 RPM

• E-Clutch™

• Dust Ejection System

• 13 Amp - 9,000 RPM

• No Lock-on switch

• E-Clutch™

• Dust Ejection System

Includes:

• (1) DCG414 Grinder

• (2) DCB606 Batteries, Fast Charger, 4-1/2" Type 27 Wheel & Guard, 6" Type 27 Guard, Wrench, Flanges, Side Handle, Kitbag

• 4.2 Amp - 25,000 RPM motor

• Paddle switch

• Precision 1/4" collet

• AC/DC capacity

• Up to 25,000 RPM with variable speed trigger

• Illuminate dark work areas with LEDs

• Multiple handle grasping options with dual-position rocker switch

• Tool Only

• Powerful, 12 amp, all ball-bearing construction

• Variable speed dial zero to 600/3500 RPM

• Heat-treated, precision-cut steel gears

• Wool ingestion shields

• Non mar rubber gear case cover

• 3 full sheets of fiberglass

• High performance aluminum oxide grain

• High grain concentration

• High grain concentration

• Proprietary material mix

• 3 full sheets of fiberglass

• High performance aluminum oxide grain

• Arbor: 5/8”-11

• Diameter: 4-1/2”

• Grain: Aluminum Oxide

• Max RPM: 13300 RPM’s

• 3 full sheets of fiberglass

• Thin .045" wheel design

• 2 full sheets of fiberglass

• Proprietary Material Mix

• Proprietary aluminum oxide grain combination

• Thin .045" wheel design for fast burr free cutting

• 2 Full sheets of fiberglass

• Proprietary aluminum oxide grain

• 15 amp / 5.5 HP motor

• QUICK-LOCK vise

• QUICK-CHANGE™ blade change system

• QUICK-FENCE™ is a 45°, adjustable fence

• Extra wide solid steel base, spindle lock, adjustable spark guard

• Powered by aluminum oxide A24P grit

• 1 HP High Speed Rail Cutting Wheels

• 2 full sheets withstand extreme conditions

• 15 amp - 4 HP motor

• Cuts ferrous and non-ferrous metals

• Carbide teeth deliver virtually burr-free cuts

• 45° adjustable Quick-Fence & Quick-Lock vise

• Proprietary material mix

• 2 full sheets of fiberglass

• High performance aluminum oxide grain

• High grain concentration for aggressive cutting action

• 50% longer life

• Precise tip placement for longer life and accurate cuts

• Stiff plate design minimizes run-out and extends life

• 5'' cutting capacity

• Integrated hang hook

• LED Work Light

• Variable speed

• Brushless motor

• 10 amp motor

• LED sight light

• Variable speed dial

• 5" deep cut capacity

• 10 amp motor

• LED sight light

• Variable speed dial

• 5" deep cut capacity

• Variable-speed trigger

• Integrated hook to hang the saw

• Quick tool-free blade changes

• Illuminate dark work areas with bright led

• Tool Only

• 8% cobalt content

• RC 65-67 tooth hardness

• Matrix II high speed steel edge

• 8% Cobalt Content

• RC 65-67 Tooth Hardness

• Matrix II High Speed Steel Edge

• Length: 32-7/8”

• Thickness: 0.02”

• TPI: 24

• 3 Pack

• Includes: (1) 20V MAX Reciprocating Saw, (1) 20V MAX XR Battery, (1) Battery Charger, (1) Kit Box

• 1-1/8" stroke length

• Variable speed trigger

• 12 amp motor

• 4-position blade clamp

• Variable speed trigger

• Keyless, lever-action blade clamp

• 0-2,900 SPM and 1-1/8" stroke length

• 4-position blade clamp

• 1-1/8" stroke length

• Variable speed trigger with 0-3000 SPM

• Pivoting adjustable shoe

• Rubber overmolded comfort grip

• Double oil sealed shaft

• Patented tooth design

• Specially formulated anti-stick coating

• Aggressive shank angle increases tooth contact

• 5 each per pack

• 8” blade with 14 TPI

• Anti-stick coating

• Aggressive shank angle

• Laser-cut expansion slots

• Blade is laser etched and color coded by material

• Extra-hard carbide ensures sharp cutting edges

• Heavy-gauge laser-cut hardened & tempered steel plate

• 15 amp motor

• 2-9/16 " Depth of cut capacity

• Integrated dust blower function

• Durable high grade Aluminum smooth base

• 57° beveling capacity w/ stops at 45° & 22.5°

• 5150 RPM motor

• 6-1/2 in. carbide-tipped blade

• High strength and lightweight magnesium shoe

• Optimized rubber overmolded comfort grip

• 0 - 50° bevel capacity

• Powerful 5150 RPM motor

• High strength & lightweight magnesium shoe

• Optimized rubber overmolded comfort grip

• 0 - 50° bevel capacity

• 6-1/2” carbide-tipped blade

• 20V MAX* Lithium Ion 5.0 AH battery

Includes:

• (1) Cordless worm drive style saw

• (1) 20V MAX Fan Corded Fast Charger

• (1) FLEXVOLT® 20V/60V MAX Battery

• (1) FLEXVOLT® carbide tipped 7-1/4” circular saw blade

• (1) Blade wrench, (1) Contractor bag

• 50% longer life

• Precise tip placement for longer life and accurate cuts

• Stiff plate design minimizes run-out and extends life

• Synthetic Polycrystalline Diamond (PCD) teeth provide maximum life and durability

• 100X Longer Life vs. Carbide Tooth Blade

Includes:

• (1) DCCS670 Brushless Chainsaw

• (1) 60V MAX* 3Ah Battery, (1) Charger, (1) Hard bar cover

Includes:

• (1) DCS331 20V MAX* Jig Saw

• (1) DCB204 20V MAX* Premium XR Li-Ion Battery (4.0Ah)

• (1) Charger, (1) Blade, (1) Kit Box

• Brushless motor

• Bright LED light

• Variable speed trigger and dial

• All-metal, lever-action keyless blade change

• Integrated dust blower

• 4-position orbital action

• No-mar shoe cover

• Tool Only

Includes:

• (1) DCS7485 60V MAX* Table Saw

• (1) Carbide Blade, (1) Push Stick, (1) Blade Guard, (1) Rip Fence, (1) Non-Thru Cut Riving Knife, (1) FLEXVOLT® 20V/60V MAX* Battery, (1) Fast Charger, (2) Blade Wrenches, (1) Miter Gauge

• Brushless motor

• Active Vibration Control

• Retractable utility hook

• 2.1 joules impact energy provides corded power without the cord

• Uses 20V MAX* XR Batteries

• Delivers 2.1 Joules of impact energy

• Shocks active vibration control system

• 2-second power-off delay

• Fully hardened steel body

• For use with all brands of SDS Max demolition hammers and rotary hammers with chipping function

• Brushless motor delivers up to 60 ft-lbs of torque

• Longer neck than standard model

• Compact and low-profile head

• Glass-filled nylon housing

• Tool Only

• Brushless motor delivers up to 70 ft-lbs of torque

• Glass-filled nylon housing

• Onboard LED work light

• Tool Only

• 10,000 max PSI

• Bright LED light

• High-volume pump

• Variable speed trigger

• 42" extra long and flexible hose

• Up to 16 cartridges per charge with a single DEWALT 20V MAX Battery

Includes:

• (1) 9 GA Stapler

• (2) 20V MAX* XR Premium Lithium Ion Batteries (5 Ah)

• (1) Charger, (1) Kit Bag

• 9 Gauge

• 960 Staples

• Zinc-Aluminum Coating

• Barbed Staple with Adhesive Coating

Includes:

• (1) FLEXVOLT® 60V MAX* Pipe Threader

• (1) Pipe Clamp, (2) FLEXVOLT® 20V/60V MAX* 9.0 Ah Glass-Filled Nylon Batteries, (1) 20V/60V MAX* Fast Charger, (1) Hard Carry Case, (1) Soft Bag

Includes:

• (1) Brushless Handheld Axial Blower

• (1) 60V MAX* 3 Ah FLEXVOLT® Battery, (1) Charger

• Ideal for clearing debris from the ground and overhead

• Part of the 20V MAX* System of products

• 3-speed design

• Tool Only

• Up to 990° F max output temperature

• Up to 42 mins of runtime per charge

• 6.7CFM

• Lock-on button

• Lock-off trigger

• LED to brighten dark areas

• Tool Only

• 10" non-flat foam tires

• 78 dBA* operational noise level

• 200 PSI max tank storage pressure

• Vertical stand feature and collapsible handle

• Oil free, maintenance free pump for convenient use

• .75 SCFM delivered @ 90 PSI pump

• 1.0 gallon tank and 135 max PSI

• Durable oil free pump

• Low 71 dBA allows for quieter operation

• Lightweight (24 lbs), thin (9.0") and compact design

• 3.0 SCFM delivered @ 90 PSI pump

• 2.5 gallon tank and 200 max PSI

• Durable oil free pump

• Low 71.5* dBA allows for quieter operation

• Lightweight (36 lbs), thin (12.5”) and compact design

• 165 max PSI 6.0 gallon tank

• 2.6 SCFM* delivered @ 90 PSI pump

• 75.5 dBA noise level for a quiet work environment

• High flow regulator and couplers

• Long life oil free pump

• 30 lb weight

• 2 universal couplers to easily support two users

• High-pressure inflation mode with automatic shutoff

• High-volume inflation and deflation modes

• LED light helps to provide illumination

• 3 power sources* (*20V MAX battery, 12V DC, or 110V AC)

• Heavy-duty rubber feet

• 1/4” Drive 6 pt Sockets: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13

• 1/4” Drive 6 pt Deep Sockets: 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 8, 9, 10, 11, 12, 13

• 3/8” Drive 6 pt Sockets: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21

• 3/8” Drive 6-Point Deep Sockets: 9/16”, 5/8”, 11/16”, 3/4”, Metric: 14, 15, 16, 17

• 1/4” Drive: Pear Head Ratchet, 3” Extension Bar

• 3/8” Drive: Pear Head Ratchet, 3/8” Dr Female to 1/4” Dr Male Adapter, 3” Extension Bar, 5/8” & 13/16” Spark Plug Sockets

• Specialty Bits / Driver: 16 Specialty Bits Bit Driver

• 1/4” Dr 6pt Sockets: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, Metric: 4, 5, 6, 7, 8, 9, 10, 11

• 1/4” Dr 6pt Deep Socket: 11/32”, 3/8”, 7/16”, 1/2”, Metric: 10, 11, 12, 13

• 3/8” Dr 6pt sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, Metric: 10, 11, 12, 13, 14, 15, 16, 17

• 3/8” Dr 6pt Deep Sockets: 9/16”, 5/8”, 11/16”, 3/4”, Metric: 14, 15, 16, 17

• Nut driver bit: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”

• 14 pc standard hex key set, 14 pc metric hex key set

• 1/4” Drive 3” Extension, 3/8” Drive 3” Extension

• 3/8” x 1/4” Reducing Adapter, 1/4”, 3/8” Pear Head Ratchet

• Vinyl grip multi driver, 22 pc bit set with storage case

• 1/4” Drive 6pt Sockets: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 5, 6, 7, 8, 9, 10, 11, 12, 13

• 1/4” Drive 6pt Deep Sockets: 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 9, 10, 11, 12, 13

• 3/8” Drive 6pt Deep Sockets: 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, Metric: 16, 17, 18, 19

• Combination Wrench: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, Metric: 10, 11, 13, 14, 15

• Nut driver bit: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 4, 5, 6, 7, 8

• 14 pc standard hex key set, 14 pc metric hex key set

• 22 pc bit set with storage case

• 1/4” Drive 6” Extension, 1/4” in Drive Universal Joint

• 3/8” Drive 6” Extension, 3/8” Drive Universal Joint

• 1/4” x 3/8” Increasing Adapter, 3/8” x 1/4” Reducing Adapter, 3/8” Spark Plug Socket 5/8”

• 1/4”, 3/8” Pear Head Ratchet, Vinyl grip multi driver

• 1/4” Dr 6pt Sockets: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13

• 1/4” Dr 6pt Deep Sockets: 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 9, 10, 11, 12, 13

• 1/2” Dr 6pt Sockets: 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, Metric: 12, 13, 14, 15, 17, 18, 19, 21

• 3/8” Dr 6pt Sockets: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• 3/8” Dr 6pt Deep Sockets: 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, Metric: 15, 16, 17, 18, 19

• Nut Driver Bits: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, Metric: 4, 5, 6, 7, 8

• Combination Wrench: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, Metric: 10, 11, 12, 14, 15, 16

• 14 pc standard hex key set, 14 pc metric hex key set, 22 pc bit set with storage case

• 1/2” Dr 5” Extension, 1/4” & 3/8” Dr 6” Extension, 1/4” Dr, 1/2” Dr, 3/8” Dr Universal Joint

• 3/8” Dr Spark Plug Socket 5/8”, 3/8” Dr Spark Plug Socket 3/4”, 3/8” x 1/4” Reducing Adapter

• 1/4”, 3/8”, 1/2” Dr Ratchet, Vinyl grip multi driver

• 1/4” Dr 6pt Sockets: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16” Metric: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

• 1/4” Dr 6pt Deep Sockets: 5/32”, 3/16”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2” Metric: 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14

• 3/8” Dr 6pt Sockets: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18 ,19, 21

• 3/8” Dr 6 pt Deep Sockets: 1/4”, 15/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8” Metric: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21

• 1/2” Dr 6pt Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” Metric: 13, 14, 15, 16, 17, 18, 19, 21, 22, 24

• 1/2” Dr 6pt Deep Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1” Metric: 13, 14, 15, 16, 17, 18, 19, 21, 22, 24

• 3/8” Dr Hex Bit sockets: 5/32”, 3/16”, 1/4”, 5/16”, Metric: 4, 5, 6, 7, 8

• 3/8” Dr Torx Bit sockets: T10, T15, T20, T25, T27, T30, T40, T45

• 14pc standard hex key set, 14pc metric hex key set

• 1/4” Dr Extensions: 3”, 6”, 10”, 3/8” Dr Extensions: 3”, 6”, 10”, 1/2” Dr Extensions: 2.5”, 5”, 10”, 1/4”, 3/8”, 1/2” Dr Ratchet, 1/4” x 3/8” Increasing Adapter, 1/4” Dr Universal Joint, 3/8” x 1/4” Reducing Adapter, 3/8” Universal Joint, 3/8” Dr Spark Plug Socket 5/8”, 3/8” Dr Spark Plug Socket 3/4”, 3/8” Dr Spark Plug Socket 13/16”, 1/2” Dr Universal Joint, 1/2” to 3/8” Dr Adapter

• STD Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”

• Deep Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 7/8”, 11/16”, 3/4”, 13/16”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 2”

• (1) Universal Joint

• 1/4” Dr Sockets: 5/32”, 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 3/8”

• 1/4” Dr Metric Sockets (MM): 5, 6, 7, 8, 9, 10, 11

• 3/8” Dr Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”

• 3/8” Dr Sockets (MM): 12, 13, 14, 15, 16, 17, 18, 19

• 3/8” Dr Ratchet, 3/8” Dr 3'' Extension, 3/8” to 1/4” Dr Adaptor, 3/8” Dr Drill Adaptor

• Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”

• Lockable Stacking Cases

• Full Polish Chrome

• Sizes (MM): 10, 11, 12, 13, 14, 15, 16, 17

• Lockable Stacking Cases

• Full Polish Chrome

• Aggressive Tooth Design

• Cuts up to 50% faster than traditional tooth designs

• Multiple Material Usage for use on drywall, plastic and other building materials

• 200 Lumens

• 24 hr runtime

• (3) AAA Batteries Included

• High 1000 Lumens

• Low 500 Lumens

• 140° pivoting head

• Built-in telescoping and 360° rotating hook

• Tool Only

• 20 Compartments

• Removable dividers for inner customization

• Heavy duty transparent Polycarbonate lid

• Side latches enable stacking to other units

• 3 pc. Tower

• Mobile storage unit, clear lid organizer, and long handle toolbox

• 7” durable wheels and a telescopic metal-plastic handle

• High-capacity storage volume due to unique opening of lid

• 2 large and 5 small removable storage cups

• Structural foam material gives robust structure to the case

• Includes screwdrivers and drills storage pockets & 4 deep large cups

• Integrated IP65 water seal

• Can stack product to other ToughSystem modules

• Side handles for carrying

• Bi-material telescopic handle

• Side latches enable stacking additional modules on top

• IP65 integrated water seal

• Robust structural foam box with huge interior space

• Removable tray for quick access to tools that are most used

• Anti-rust metal latches

• Side handles for carrying

• 12 removable bins for small parts

• Can connect to other PRO line organizers

• Locking mechanism on top

• Can be mounted on a wall

• Able to be powered by 20V MAX* and FLEXVOLT® 20V/60V MAX* batteries, as well as AC power cord

• 3 AMP charging

• Bluetooth connectivity up to 100’

• 2 Additional AC power outlets

• Gore™ HEPA wet/dry filter traps 99.97% of dust at 0.3 microns

• 2-gallon tank capacity

• Easily accessible, washable, and reusable filter

• HEPA rated wet-dry filter traps with 99.97% efficiency at 0.3 microns

• Flexible 5 ft. x 1-1/4 in. diameter hose

Includes:

• (1) 6-1/2” - 18T

• (1) 6-1/2” - 24T

• 2-Pack