• Dual Impact Torsion Zone™

• Compatible with 1/4" hex shank impact drivers and drills

• Optimized tip geometry

• Unique steel formulation & heat treat process

• Laser markings

• alphaCASE™ pivoting and detachable rails

• Dual Impact Torsion Zone™

• Withstands heavy use in impact applications

• Compatible with 1/4" hex shank impact drivers and drills

• Optimized tip geometry

• Unique steel formulation

• Dual Impact Torsion Zone™

• Withstands heavy use in impact applications

• Compatible with 1/4" hex shank impact drivers and drills

• Optimized tip geometry

• Unique steel formulation

• Dual Impact Torsion Zone™

• Withstands heavy use in impact applications

• Compatible with 1/4" hex shank impact drivers and drills

• Optimized tip geometry

• Unique steel formulation

Includes:

• 1/2" x 6"

• 5/8" x 6"

• 3/4" x 6"

• 7/8" x 6"

• 1" x 6"

• 1-1/4" x 6"

Includes:

• 5/8" x 6"

• 3/4" x 6"

• 1" x 6"

• Optimal cutting edges

• Tip and flute design

• Triple sharpened high speed steel

• Deep flutes

• 1/4" quick-release hex shank

• Optimal cutting edges

• Tip and flute design

• Triple sharpened high speed steel

• Deep flutes

• 1/4" quick-release hex shank

• Optimal cutting edges

• Tip and flute design

• Triple sharpened high speed steel

• Deep flutes

• 1/4" quick-release hex shank

• Optimal cutting edges

• Tip and flute design

• Triple sharpened high speed steel

• Deep flutes

• 1/4" quick-release hex shank

• No-Spin shank eliminates the frustration of bit spinning in the chuck

• Tapered web provides greater durability to reduce breaking

• Size markings are located above the shank to prevent wearing away

• Pilot Point® Tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough

• Titanium Coating for Longer Life

• Patented Pilot Point Tip Starts on Contact

• Drill Bits: (2) 1/16", 5/64", 3/32", 7/64", (2) 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16", 3/8"

• PILOT POINT® bit tip starts on contact for clean, accurate holes

• Industrial strength cobalt

• Works with 1/8” to 3/4”, #1 to #30, A to Z, and 3 to 19mm drill bits

• Automatically adjusts to the correct clearance angle

• Includes table for translating the overhang requirement to the correct point angle for the target material

• 135° split point tip

• Automatic indexing

• Removable cartridges

• Rubber overmolded case

• M-35 5% cobalt high speed steel

• Sizes include 1/16" to 1/2" in 1/64" increments

• 135° split point tip

• Removable cartridges

• Titanium Nitride Coating

• Sizes include 1/16" to 1/2" in 1/64" increments

• Sizes: 1/16” - 1/4” in 1/64” increments

• M-2 high speed steel

• Standard 118° point for use in wood, metal, and plastic

• Sizes: 9/16” - 1” in 1/32” increments

• M-7 high speed steel

• Three-flatted shank design

• Silver & Deming High Speed Steel

• Standard 118° point for use in wood, metal, and plastic

• 135° split point tip

• Rubber overmolded case

• Removable cartridges

• Sizes include 1/16" to 1/2" in 1/64" increments

• Oxide treatment resists corrosion, helps prevent bit from rusting

• M-7 high speed steel

• 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• M-7 high speed steel

• 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• Bit is constructed of M-7 high speed steel

• Three-flatted shank design

• All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• Bit is constructed of M-7 high speed steel

• Three-flatted shank design

• All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• Bit is constructed of M-7 high speed steel

• Three-flatted shank design

• All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• Bit is constructed of M-7 high speed steel

• Three-flatted shank design

• All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• Bit is constructed of M-7 high speed steel

• Three-flatted shank design

• All Silver & Deming bits are 6" long and feature a 1/2" reduced shank that fits all 1/2" drills

• Standard 118° point for use in wood, metal, and plastic

• Bit is constructed of M-2 high speed steel

• For general use in wood, metal, and plastic

• Black oxide coating resists corrosion

• 135° split point

• Bit is constructed of M-2 high speed steel

• For general use in wood, metal, and plastic

• Black oxide coating resists corrosion

• 135° split point

• Bit is constructed of M-2 high speed steel

• For general use in wood, metal, and plastic

• Black oxide coating resists corrosion

• 135° split point

• Bit is constructed of M-2 high speed steel

• For general use in wood, metal, and plastic

• Black oxide coating resists corrosion

• 135° split point

Includes:

• #1, #2, and #3 Phillips

• Square Insert & Power Bits

• T10, T15, T20, T25, T27, T30, T40 Insert Torx Bits

• 1/4”, 5/16”, 3/8” Nutsetters

• 1/4” - 3/8” Socket Adapter

• Hole Sizes: 1/8” - 1/2”

• 13 Steps

• 1/8” Thickness

• Single-flute cutting edge

• Hex shank prevents slipping in drill chuck

• Hole Sizes: 3/16” - 1/2”

• 6 Steps

• 3/8” Thickness

• Single-flute cutting edge

• Hex shank prevents slipping in drill chuck

• Hole Sizes: 1/4” - 3/4”

• 9 Steps

• 1/8” Thickness

• Single-flute cutting edge

• Hex shank prevents slipping in drill chuck

• Includes: HSS #1, 2 & 3

• Single-flute cutting edge

• 3 flatted shank prevents slipping

• Non-skid self-starting tip eliminates skidding

• Single flute cutting edge

• Hex shank prevents slipping in drill chuck

• New SpeedPoint tip

• Two hole sizes

• Thick 3/8” hex shank

• Two flutes cut faster and keep bit cooler

• Two flutes

• Thick 3/8” hex shank

• 3 hole sizes

• 9 hole sizes

• 1/16” increments

• Two flutes cut faster & keep bit cooler

• Flatted Shanks Allow For Tight Fit

• Short, Mechanics Length Design

• Self-Centering 135° Split Point

• NoMo Surface Treated High Speed Steel

• Brute Drills Are Engineered To Be Flexible

• Drill Aluminum, Steel, Stainless Steel, Titanium Alloys

• Self-Centering 135° Split Point For Precision Drilling

• NoMo Surface Treated High Speed Steel

• Brute Drills Are Engineered To Be Flexible

• Sizes: 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

• 9/16” - 1”

• HD 135° split point

• 3 flats on the shank

• 1/2” Shank silver & deming bits

• 1/16” – 1/2”

• 135° split point

• Metal index case

• Black oxide finish

• Jobber length style bits

• 1/16” – 1/2”

• 135° split point

• Ultra-dex bit case

• Black oxide finish

• Jobber length type bits

• 135° split point

• Metal index case

• Black and gold finish

• Magnum super premium bits