• Used to cut and shape metals softer than the cutting edge of the chisel

• Cutting-edge angle designed to provide greater strength

• Made in the USA

• Black oxide finish to deter rust

• Cold chisels are made in the USA

• Cold Chisels act to shape and cut cold metal only

• Acts to shape & cut cold metal only

• Black oxide finish to deter rust

• Made in the USA

• Many specialized uses

• Used for cutting round grooves in metal

• Black oxide finish for rust protection

• Made in the USA

• Used to cut and shape metals softer than the cutting edge of the chisel

• Cutting-edge angle designed to provide greater strength

• Made in the USA

• Used to make a v-shaped groove in metal

• Provides a sharp pointed bottom to the grooves

• Available in varying cuts and lengths, for varying sizes of grooves

• Made in the USA

• Used to drive out and remove already loosened pins and keys after initial movement by a solid punch

• Variable point sizes and lengths for different applications

• Made in the USA

• Used to drive out & remove loosened pins and keys

• Black oxide finish for rust protection

• Made in the USA

• Used to align holes through which rivets, pins, or bolts will be inserted

• Not for use when driving pins, rivets, or bolts

• Variable point size, shank size, and taper length for the perfect alignment

• Made in the USA

• Designed with a rounded end that fits snugly within a roll pin

• Used to drive in and remove roll pins or other hollow tension pins

• Used to drive out and remove already loosened pins and keys after initial movement by a solid punch

• Variable point sizes and lengths for different applications

• Made in the USA

• Used for piercing, or marking for starting drills, in metal and other materials

• Point sizes vary for larger or smaller holes

• Variable point size, shank size, and taper length for the perfect alignment

• Made in the USA

• Designed to scribe lines in metal

• Black oxide finish to prevent rust

• Made in the USA

• Used for piercing, or marking for starting drills, in metal and other materials

• Point sizes vary for larger or smaller holes

• Variable point size, shank size, and taper length for the perfect alignment

• Made in the USA

• Used for non-marring applications; also designed to inhibit sparking

• Made from consumable brass, designed not to mar steel

• Made in the USA

• Designed not to mar steel

• For non-marring applications & to constrain sparking

• Made in the USA

• Sizes: 3/16”, ¼”, 5/16”

• OA length 12”

• 1 Piece Design

• Large Striking End cap

• Long, tapered end for aligning and adjusting metal or wood

• Angled chisel end for extra leverage when prying

• Made in the USA

• Long, tapered end for aligning and adjusting metal or wood

• Angled chisel end for extra leverage when prying

• Made in the USA

• Long, tapered end for aligning and adjusting metal or wood

• 90° angled chisel end for extra leverage when prying

• Rolling head helps provide leverage

• Made in the USA

• Solid forged head

• Features a rocking head

• Pointed end is used for alignment

• Made in the USA

• Used for prying and lifting

• Durable acetate handle provides a more comfortable and secure grip

• Made in the USA

• Used for prying and lifting

• Durable acetate handle provides a more comfortable and secure grip

• Made in the USA

• Used for lifting and prying

• Ergonomically designed handle

• Heat treated along the entire length of the steel

• Black oxide finish for additional rust protection

• Stainless steel

• For loosening pins & keys or knocking out rivets

• Includes: 14" Line-Up Pry Bar, 20" Line-Up Pry Bar, 16" Rolling Head Pry Bar

• Hardened chrome vanadium shafts

• Set includes a mini curved 90 degree hook complex hook and scratch awl

• Overall length is 6.5 inches

• Sizes: 3/4”, 7/8”, 1-1/8”, 1-3/8”

• Black Oxide Finish

• Heavy Duty Pouch

• Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”

• Black Oxide Finish

• Corrosion Resistant

• Sizes: 1/8”-1/4”, 1/4”-5/16”, 5/16”-7/16”, 7/16”-9/16”, 9/16”-3/4” Spiral Extractor

• Hardened steel edges for easy removal of damaged screws

• Fluted cutting edges for cutting into the screw shaft

• Set includes a heavy duty case with extra space to store your drill bits

• Used for prying and lifting

• Blade are heat treated the entire length

• Curved blade style gives extra leverage

• Made in the USA

• Includes: 3/8" & 7/16" Brass Line up Punches and 3/4” Brass Drift Punch

• Anti-Slip Pouch

Includes:

• 1” x 3”, 2” x 4”, 3” x 6” Phillips Screwdriver

• 7/32” x 4”, 1/4” x 6”, 5/16” x 7” Slotted Screwdriver

Includes:

• 1” x 3”, 2” x 4”, 3” x 6”, 2” x 6”, 2” x 6”, 2” x 1-1/2” Phillips Screwdrivers

• 7/32” x 4”, 1/4” x 6”, 5/16” x 7”, 3/8” x 8”, 1/4” x 1-1/2” Slotted Screwdrivers

• Cushioned grip with textured finish

• Screwdriver utilizes ball and detent technology

• Rust preventative dip increases tool life

• Bits are blast finished to increase bit grip on fastener

• 6 Pack

• Sizes: 1/2”, 3/4”, 7/8”, 1”

• Comfortable Grip Reduces Shock

• Minimized Hammer Kick-Back

• Sizes: 1/8”, 5/32”, 5/32”, 1/4”

• Unbreakable Polymer Cap

• Oil-Resistant Cushion Grip

• Minimized Kick-Back

• Assorted Set

• 1/8” Starter Punch

• 7/32” & ¼” Center Punch

• 7/32” Prick Punch

• Includes: 7/8” x 18” Cold Chisel, 14” Line-Up Pry Bar, 20” Line-Up Pry Bar, 16” Rolling Head Pry Bar

• Sizes: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”

• Shot-Blasted Finish

• Sizes: 1/4” x 5”, 5/16” x 5”, 3/8” x 5-1/2”, 1/2” x 6”, 5/8” x 6-1/2”, 3/4” x 7”

• Black Oxide Finish

• Sizes: 3/32”, 5/32”, 3/16”, 5/16”, 3/8”

• Black Oxide Finish

• Sizes: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, Center Punch

• Black Oxide Finish

• Includes: 1/2” & 5/8” Cold Chisel, 3/16” Solid Punch, 1/8” & 3/16” Pin Punch, 3/16” Center Punch

• Black Oxide Finish

• For loosening pins & keys or knocking out rivets

• Stainless steel

• For loosening pins & keys or knocking out rivets

• Stainless steel

• For loosening pins & keys or knocking out rivets

• 1" diameter punch & chisel holder

• Stainless steel

• For loosening pins & keys or knocking out rivets

• Sizes: 3/32”, 1/8”, 3/16”, 1/4”, 5/32”, 5/16”

• Black Oxide Finish

• Includes: Dominator 8-C (8"), 12-C (12"), 17-C (17"), 25-C (25"), 31-C (31")

• Two-composite, ergonomical handle

• Metal striking cap at the end of the handle

• Lasting acetate handle

• Black oxide finish for rust protection

• Style pry bars are used for lifting & prying

• Made in the USA

• A 12" OAL and a curved end that provides extra leverage

• Metal striking cap at the end of the handle

• Made in the USA with a Lifetime Warranty

Includes:

• 1/8” & 3/16” Solid Punch

• 3/16” & 1/4” Pin Punch

• 3/8” Prick Punch

• 5/16” Center Punch

• Sizes: 1/8, 3/16, 1/4, 5/16, 3/8”

• Black Oxide Finish

• Sizes: 1/8”, 5/32”, 3/16”, 1/4”

• Black Oxide Finish

• Sizes: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”

• Sizes: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”

• Sizes: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”, 7/16”, 1/2”

• Black Oxide Finish

Includes:

• 3/4” Brass Drift Punch

• 1/2” Brass Drift Punch

• 3/8” Brass Drift Punch

Includes:

• 3/8” Brass Drift Punch

• 1/4” Brass Solid Punch

• 1/4” Brass Pin Punch

• 3/8” Brass Pin Punch

• Sizes: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”

• Black Oxide Finish

• Sizes: 1/8”, 3/16”, 1/4″, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”

• Sizes: 3/32”, 1/8”, 5/32”, 3/16”, 1/4”, 5/16”

• Sizes: 1/16" (#1) to 1/2" (#12)

• Solid hard wood display block with semi gloss finish

Includes:

• 3/4” x 12” hand guarded chisel

• 3” hand guarded brick set

• 2-1/4” x 7-3/4” hand guarded mason chisel

• 2-1/2” hand guarded floor chisel

• 6-1/2” Pick & Chisel Head

• 11-1/2” PVC Handle

• Alloy Steel Construction

• Weight: 2-1/2 pounds

• Black oxide finish for rust protection

• Used to drive out & remove loosened pins & keys

• Made in the USA

• Black oxide finish

• Made in the USA

• Used for lifting and prying

• Ergonomically designed handle

• Heat treated along the entire length of the steel

• Black oxide finish for additional rust protection

• Used in demolition for pulling, prying and removing nails from hardwood

• Powder coating for increased rust & damage protection

• Made in the USA