• Sizes: 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

• Sizes: 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”

• Sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

• Sizes: 1/4” to 1” combination gear wrenches

• Surface drive® on box end

• Bright, full polish chrome finish

• Ratcheting box end needs as little as 5° to move fasteners vs the standard 30°

• Sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"

• Surface drive® on box end

• Bright, full polish chrome finish

• Ratcheting box-end needs as little as 5° to move fastener vs standard 30°

• Sizes: 5/16", 3/8", 7/16", 1/2", 9/16", 5/8" & 3/4"

• Surface drive box end

• Bright, full polish chrome finish

• Ratcheting box-end needs as little as 5° to move fastener vs the standard 30°

• Sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"

• Sizes (MM): 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• Surface drive® on box end

• Bright, full polish chrome finish

• Ratcheting box-end needs as little as 5° to move fastener vs the standard 30°

• Sizes (MM): 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

• Sizes (MM): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• Sizes: 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

• Sizes: 1/4" x 5/16", 5/8" x 11/16", 3/8" x 7/16", 3/4" x 7/8", 1/2" x 9/16"

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”

• 15° offset

• Full polish chrome finish

• Long pattern beam length

• Hard stamped size marking

• Off-corner loading design on box end

• 15° offset

• Satin finish

• Long pattern beam length

• Hard stamped size marking

• Off-corner loading design on box end

• 12 Point

• 72 tooth ratcheting box end

• Size conveniently stamped on both ends

• Manufactured from alloy steel

• Bright, full polish chrome finish

• 90-tooth ratcheting box end delivers a 4° swing arc

• Off-corner loading design on box end

• 12-point ratcheting box-end

• For use on 6 or 12-point fasteners

• Bright, full polish chrome finish

• 72 tooth ratcheting box end

• Off-corner loading design on box end

• Manufactured from alloy steel

• Bright, full polish chrome finish

• X-Beam™ design lets you apply force to the flat side of the wrench

• 12 Point

• 72 tooth ratcheting box end

• Flush mounted reversing lever

• 15° offset offers increased clearance

• Manufactured from alloy steel

• Bright, full polish chrome finish

• 12 Point

• Large striking surface

• Straight rectangular design

• Manufactured from alloy steel and heat-treated

• Made in the USA

• Primary Scale Range: 100 ft/lb - 600 ft/lb

• 36-tooth ratchet mechanism with a 10° swing arc

• Pliable, elastomer handle

• Twist locking collar

• Input: 1/2” Dr

• Output: 3/4” Dr

• Max Input: 227 ft/lb

• Max Output: 750 ft/lb

• Input: 1/2” Dr

• Output: 3/4” Dr

• Max Input: 200 ft/lb

• Max Output: 1200 ft/lb

Includes:

• (10) 1/4” Dr STD Sockets - 6pt

• (7) 1/4” Dr Deep Sockets - 6pt

• (11) 1/4” Dr Metric Sockets - 6pt

• (7) 1/4” Dr Metric Deep Sockets - 6pt

• (7) 3/8” Dr STD Sockets - 6pt

• (7) 3/8” Dr Deep Sockets - 6pt

• (10) 3/8” Dr STD Sockets - 6pt

• (10) 3/8” Dr Deep Sockets - 6pt

• (7) 3/8” Dr STD Sockets - 12pt

• (7) 3/8” Dr Metric STD Sockets - 12pt

• (6) 1/2” Dr STD Sockets - 12pt

• (6) 1/2” Dr Metric Deep Sockets - 12pt

• (3) Phillips Bits, (3) Metric Slotted Bits, (3) Torx Bits, (7) Nutdriver Bits, (7) Metric Nutdriver Bits, (4) Open End Wrenches, (13) Long Arm SAE Hex Keys, 1/4” Dr Ratchet, 3/8” Dr Ratchet, 1/2” Dr Ratchet, 1/4" Dr 1/4" Bit Adapter, 1/4" Dr 3” Extension, 3/8" Dr 6” Extension, 1/2" Dr 3” Extension

Includes:

• (11) 1/4" Dr Standard SAE Sockets

• (13) 1/4" Dr Standard Metric Sockets

• (10) 1/4" Dr Deep SAE Sockets

• (11) 1/4" Dr Deep Metric Sockets

• (3) Ratchets Socket Driver, (13) Long Arm Hex Keys, (12) Combination Wrenches, (4) Extensions Bit Adapter with (23) Bits

Includes:

• 1/4", 3/8", 1/2" Dr STD & Deep Sockets - 6pt

• 1/4", 3/8", 1/2" Dr STD & Deep 12 Point Sockets - 12pt

• 1/4", 3/8", 1/2" Dr Quick Release Ratchets

• 1/4”, 3/8”, 1/2” Dr Extensions

• 1/4” Dr Spinner Handle, 1/4” Dr Bit Adapter, SAE & Metric Long Arm Hex Keys, 12 Point SAE & Metric Combination Wrenches, Phillips Bits, Slotted Bits, Torx Bits, Nutdriver Bits

Includes:

• 1/4", 3/8", 1/2" Dr STD & Deep Sockets - 6pt

• 1/4", 3/8", 1/2" Dr STD & Deep Sockets - 12pt

• 1/4", 3/8", 1/2" Dr Quick Release Ratchets

• 1/4”, 3/8”, 1/2” Dr Extensions

• 3/8” Dr Spark Plug Sockets - 6pt, Magnetic Bit Screwdriver Handle, SAE & Metric Long Arm Hex Keys, 12 Point SAE & Metric Combination Wrenches, Phillips Bits, Slotted Bits, Torx Bits, Nutdriver Bits

Includes:

• STD Sockets: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"

• Deep Sockets: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"

• STD Sockets (MM): 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• Deep Sockets (MM): 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• 4-3/4" Stubby Ratchet, 8-1/4" Ratchet, 3” & 6” Extensions, Universal Joint

• Sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1"

• Sizes (MM): 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• Sizes: 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8"

• Sizes (MM): 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• Sizes: 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64” 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

Includes:

• 1/4” Dr Sizes (MM): 7, 8, 10, 11

• 3/8” Dr Sizes (MM): 12, 13, 14, 16

Includes:

• 1/4” Dr Sizes: 1/4”

• 1/4” Dr Sizes (MM): 7, 8

• 3/8” Dr Sizes: 9/16”, 11/16”, 3/8”

• 3/8” Dr Sizes (MM): 10, 11, 12, 13-, 13, 14, 16, 17, 19

• Sizes: 3”, 6”, 10”

• Sizes: 3”, 6”, 12”

• Sizes: 3”, 6”, 10”, 12”

• Locking mechanism with sliding collar

• Knurled grip provides a nonslip surface

• Bright, full polish chrome finish

• Hard stamped size markings

• Chrome molybdenum alloy steel

• Pin hole can be used with pin and o-ring

• Locking mechanism with sliding collar

• Manganese phosphate finish

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”

• 11” Ratchet, 15” Breaker Bar, 5” Extension, Universal Joint

• Includes Storage Case

• Large Hard Stamp Size Markings

• Knurled Full Polish Chrome Extensions

• 84 Tooth Full Polish Chrome Thin Profile Ratchet

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”

• 11” Ratchet, 15” Breaker Bar, 5” Extension, Universal Joint

Includes:

• STD Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-1/2”

• Deep Sockets: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-1/2”

• 11” Ratchet, 15” Breaker Bar, 3” & 5” Extension, Universal Joint

• Sizes: 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/18

• Sizes (MM): 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24

• Sizes: 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-1/2”

• Sizes (MM): 10, 11, 12, 13, 14, 15, 16, 17, 18, 19

• Sizes: 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”

• Sizes: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4, 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-1/4" & 1-1/2”

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

• Sizes: 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 3/4”

• Off-corner loading design

• Chamfered opening

• Bright, full polish chrome finish

• Chrome molybdenum alloy steel

• Off-corner loading design

• Black oxide finish to resist corrosion

• Sizes: 19mm (3/4”), 21mm (13/16”), 22mm (7/8”), 24mm (15/16”), 25mm (1”)

• Sizes: (2) 19mm (3/4”), (2) 21mm (13/16”), (2) 22mm (7/8”), (2) 24mm (15/16”), (2) 25mm (1”)

• Dual sized sockets for SAE and metric fasteners

• Chrome molybdenum alloy steel (Cr-Mo)

• High-visibility laser etched markings

• Black oxide finish

• Sizes: 5”, 10”, 15”

• Sizes: 3”, 5”, 10”

• Ball detent for secure socket retention

• Knurled grip provides a nonslip surface

• Hard stamped size markings

• Bright, full polish chrome finish

• Knurled grip provides nonslip surface

• Ball detent for secure socket retention

• Bright, full polish chrome finish

• 1/2” Dr Female

• 3/8” Dr Male

• Bright, full polish chrome finish

• Sizes: 3”, 5”, 10”, 15”

• Flex socket design

• Off-corner loading design

• Manganese phosphate finish

• Chrome molybdenum alloy steel (Cr-Mo)

• High-visibility laser etched markings

• Includes tray for storage and organization

• Pin hole can be used with pin and o-ring

• Manganese phosphate finish

• Hard stamped size markings

• 120XP™ ratchets have two double stacked 60 tooth pawls (120 positions) providing a 3° swing arc

• Teardrop, low-profile head

• Longer reach handle

• Bright, full polish chrome finish

• 1” Dr

• Teardrop shaped head

• Flush mounted on/off lever

• Long, full polish chrome handle

• 84 tooth gear offers a 4.3°swing arc

• Bright, full polish chrome finish

• Meets or exceeds ASME specifications

• 45-tooth teardrop shaped head

• Quick release design

• Sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

• 19-3/4” Ratchet, 8” Extension

• Sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2”, 2-1/8”, 2-3/16”, 2-1/4”, 2-3/8”

• Extensions: 5”, 8”, 16”

• 19-3/4” Ratchet, 19” Breaker Bar, 18” Sliding T Handle

• Sizes: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”

• Sizes: 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16”, 2”, 2-1/16”, 2-3/16”, 2-1/4”, 2-3/8”

• 3/4” Dr

• Quick release design

• Bright, full polish chrome finish

• 24 tooth teardrop shaped head with on/off switch

• Pin hole can be used with pin and o-ring

• Manganese phosphate finish

• Hard stamped size markings

• Color coded - SAE & Metric

• Quick to read size markers

• Set includes racks for 1/4" 3/8" and 1/2" drives

• Each rack can hold both standard and deep sockets

• Color coded - SAE & Metric

• Quick to read size markers

• Set includes racks for 1/4" 3/8" and 1/2" drives

• Each rack can hold both standard and deep sockets

• Sizes: 1/8”, 5/32”, 3/16”, 7/32”, 1/4”, 5/16”, 3/8”

• 1/4" Dr Torx Press Fit Bit Socket Sizes: T-8, T-10, T-15, T-20, T-25

• 1/4" Dr Torx Tamper-Proof Bit Socket Sizes: T-7, T-8, T-10, T-15, T-20, T-25, T-27, T-30

• 1/4" Dr External Torx Socket Sizes: E-4, E-5, E-7, E-8

• 3/8" Dr Torx Press-Fit Bit Socket Sizes: T-40, T-45, T-47, T-50, T-55

• 3/8" Dr Torx Tamper-Proof Bit Socket Sizes: T-45, T-50, T-55

• 3/8" Dr External Torx Socket Sizes: E-10, E-12, E-14, E-16

• 1/2" Dr Torx Press Fit Bit Socket Sizes: T-60

• 1/2" Dr External Torx Socket Sizes: E-20

• 1/4" Dr Torx Press Fit Bit Socket Sizes: T-27, T-30

• 1/4" Dr External Torx Socket Sizes: E-6

• 3/8" Dr Torx Tamper-Proof Bit Socket Sizes: T-40

• 1/2" Dr External Torx Socket Sizes: E-18

Includes:

• 8" Diagonal Cutting Compound Action Plier

• 8" Long Nose Cutting Compound Action Plier

• Straight & 45° Pliers

• Flush Rivet

• Compound Joint

• Jaws Open Greater Distance Than the Handle

• Straight and 45° Pliers

• Flush rivets

• Serrated jaws

• Compound joint

• Jaws open wider than the handles

• Comfort grip handles

• 20° head angle for flush cutting

• Cross hatched jaw tooth design

• Nail and wire holder groove on jaws

• K9™ jaw design

• High leverage joint design

• K9™ jaw design

• High leverage joint design

• Aggressive angled teeth

• 20° head angle for flush cutting

• Cross hatched jaw tooth design

• Nail and wire holder groove on jaws

• Straight jaws

• Anti-rust clear coat

• Ergonomic dipped grips

• Manufactured from alloy steel

• Interlocking tongue and groove design won't slip

• V-jaws

• Anti-rust clear coat

• Ergonomic dipped grips

• Manufactured from alloy steel

• Interlocking tongue and groove design won't slip

• For gripping rounded objects like pipes and cables

• Anti-rust clear coat

• Professional dipped grips

• Manufactured from chrome vanadium steel

• Push button allows quick and easy size adjustment

• Induction hardened V-jaws with angled teeth

• Laser hardened cutting edge

• Ideal for general wire cutting and flush cutting

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Laser hardened cutting edges

• Precision machined serrated jaws

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Laser hardened cutting edge

• Finely serrated jaws

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Jaws open wider than the handles

• Flush rivets for strength with a narrow profile

• Serrated jaws for precision gripping

• Manufactured from alloy steel

• Comfort grip handles

• 2 locking positions

• Shear style wire cutter

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Induction hardened cutting edge

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Standard bevel edges for general wire cutting

• Induction hardened cutting edge

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Machined, cross check jaw pattern twists and grips in any direction

• Laser hardened cutting edges

• Throat shaped designed to give maximum clearance

• Manufactured from alloy steel

• Anti-rust clear coat

• Ergonomic dipped grips

• Includes: (1) 9-1/2" external plier & (1) 9-1/2" internal plier

• Replaceable tips:

(4 Pairs) .108 Straight, 15°, 45° & 90°

(4 Pairs) .12 Straight, 15°, 45° & 90°

• Made in the USA

• Versatile heavy-duty design

• Remove and install internal and external snap rings

• Fixed tips for everyday professional use

• Comfort grip handles to reduce user hand fatigue

• Versatile heavy-duty design

• Remove and install internal and external snap rings

• Fixed tips for everyday professional use

• Comfort grip handles to reduce user hand fatigue

Includes:

• Phillips Sizes: #1 x 3", #2 x 4"

• Slotted Sizes: 1/4" x 4", 5/16" x 6", 1/8" x 4", 3/8" x 8"

• ‎Slotted Sizes: 3/16” x 6”, 1/4” x 1-1/2”, 1/4” x 4”, 1/4” x 6”, 5/16” x 6”, 3/8” x 8”

• Phillips Sized: #0 x 2-1/2”, #1 x 3”, #1 x 6”, #2 x 1-1/2”, #2 x 4”, #3 x 6"

• ‎Pozidriv Sizes: #0 #1 #2 #3

• Phillips Sizes: #1 #2

• Slotted Sizes: 1/8”, 3/16”, 1/4”, 5/16”

• Magnetic Bit Shaft

• Etched part numbers on the shafts

• Full polish alloy steel screwdriver shaft

• Bit holding shafts work with standard 1/4" bits

• Sizes: 3/16”, 1/4”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”

• Spring-loaded cap

• Patented twist lock guide system

• 5° ratcheting arc with reversible lever

• Die adapter works on round and hex shaped dies

• Spring-Loaded Cap

• Extension Adapters

• Patented Twist Lock Guide System

• 5° Ratcheting Arc with Reversible Lever

• Die Adapter Works on Round and Hex Shaped Dies

• Tapered cutting edges

• Clear laser etched size markings for easy identification

• Manufactured from carbon steel

• Clear laser etched size markings

• Manufactured from carbon steel

• Angled tip

• Tapered end

• Chiseled edge

• Manufactured from alloy steel

• Made in the USA

• Expandable and adjustable

• Head rotates 180° through 14 locking positions

• Grooved head profile grips and holds securely

• Heads rotate 180° through 14 locking positions

• Compact design allows for work in tight spaces

• Smooth head profile fits into low access areas

• Exceeds ASME and ANSI requirements

• Tapered end

• Rolling wedge head

• Manufactured from alloy steel

• Black oxide coating to resist corrosion

• Head-to-handle locking system uses epoxy and wedges

• Tether ring made of steel-reinforced copper

• Built from alloy steel with a polished black finish

• Handle has a fiberglass core with a polypropylene wrap

• Slip-resistant reverse tier handle

• Sizes: 1/4” & 5/16”, 3/8”, 7/16” 1/2” & 9/16”, 5/8”

• Spiral blades grip the screw tightly

• Ideally used for extracting screws

• Used to remove broken, embedded or damaged screws and studs

• Non-scratch magnet won't damage your work area

• Tray can mount horizontally or vertically

• Swiveling plastic rim keeps non-magnetic parts from falling out of the tray when hung vertically

• Non-scratch magnet won't damage your work area

• Tray can mount horizontally or vertically

• Swiveling plastic rim keeps non-magnetic parts from falling out of the tray when hung vertically

• Four 6” x 2” polyurethane casters

• Vise mount capability for heavy-duty work

• Heavy-duty, 20 gauge steel frame and drawers

• 19,000 cubic inch storage capacity and a 2,000 lb load capacity

• Drawers use full extension ball bearing slides rated to a 100 lbs load limit

• EVA drawer liners come standard as well as a 6mm thick EVA top mat

• Top drawer features customizable partition system for ease-of-use

• Built-in charging station with 6 outlets and 2 USB ports

• Hone and remove glaze from engine cylinders from 2" to 7"

• Adjust spring tension for positive cutting action and set diameter with spread limiter

• Includes medium grit stones no. 240

• Grit: 240

• 3 pc replacement stone set

• Use with engine cylinder hone 2833D

Includes:

• 3 arm brake, master and wheel cylinder hone - (3/4" to 2-1/2" Capacity)

• 2 arm small car brake wheel cylinder hone - (1/2" to 1-3/4" Capacity)

• 3 arm disc brake caliper honing - (1-1/4" to 3-1/2" Capacity)

• One set of 2" medium grit stones

• Tester has a 16" rubber hose and is a serviceable product

• Includes special air-hold valve to easily reset gauge

• Checks cylinder compression from 0 to 300 PSI

• Adapters fit 14 and 18mm spark plug holes

• Special air-hold valve is included to reset gauge easily

• 5 magnetic parts trays

• Heavy duty 3-1/2" casters

• Seat swivels 360°

• Air shock adjustable seat

• Seated height adjusts from 18” to 22”

• 225 lbs capacity

• Solvent resistant padded seat

• Air shock adjustable seat

• Seat height adjusts from 26” to 31”

• Powder coated metal frame

• Seat swivels 360°

• 225 lb capacity