Enviromentally safe

Protects against rust, oxidation and corrosion

Will not harden, evaporate or settle out

Requires no thinning

Water resistant

Enviromentally safe

Protects against rust, oxidation and corrosion

Will not harden, evaporate or settle out

Requires no thinning

Water resistant

Lowers friction

Contains no lead or zinc

Reduces wrench torque

Will not run, drip, or settle out

Not affected by contraction, expansion, or vibration

Permits reuse of fittings; saves stud, bolt, and nut replacement

Lowers friction

Contains no lead or zinc

Reduces wrench torque

Will not run, drip, or settle out

Not affected by contraction, expansion, or vibration

Permits reuse of fittings; saves stud, bolt, and nut replacement

High content of aluminum

Micro sized particles for lubrication

Choice for components made of aluminum alloys

Protects threads from rust corrosion and seizing

No lead

Nontoxic

Nonstaining

Contains PTFE

Safe for portable water lines

Does not require mixing

Contains no lead or graphite

High content of micro-size , pure copper flakes

Will not separate, settle out, harden, or dry out in storage

Fortified with anti-oxidants and corrosion inhibitors

Assures protection against rust, oxidation, and corrosion

Will not harden, evaporate, or settle out; and it requires no thinning

Homogeneous composition offers maximum protection against seizure and heat

Lead free

Lowers friction; reduces wrench torque

Provides easy makeup and breakout

Will not run, drip or settle out

Protects against seizure, heat freeze, galling, rust and corrosion

No VOC's

Lead-free

Rust & corrosion inhibitors

Not affected by contraction, expansion or vibration

It will not harden, evaporate, or settle out; and it requires no thinning

No VOC's

Lead-free

Rust & corrosion inhibitors

Not affected by contraction, expansion or vibration

It will not harden, evaporate, or settle out; and it requires no thinning

No metallic components

Non-conductive

Environmentally safe

Specially formulated for to meet the requirements for marine and offshore environments

Will Not Harden Or Dry

Prevents Galling And Wear

Custom-Refined, Low-Sulfur Oil

Can Withstand Pressures Up To 10,000 PSI

Additives For Rust And Corrosion Protection

Economical

Multifunctional

Nonmetallic

Rust, corrosion & oxidation additives

Sticks to wet or oily threads

Non-metallic

High temp grease

Non-conductive for MWD drilling applications

Resistance to high pH drilling fluids / muds

Seals badly worn threads

Greatly increases connection life

Provides protection against galling and wear

Brushable

Non-hardening

Contains no metallic additives

Will not run, drip, or settle out

May be used on both ferrous and Non-ferrous metals

Lubricants and seals

Brushable

Non-hardening

Contains no metallic additives

Will not run, drip, or settle out

May be used on both ferrous and Non-ferrous metals

Lubricants and seals

NSF P-1 Registered

Allows immediate pressurization

Non-petroleum based for use with potable water

Contains PTFE and natural fillers

Water-resistant, non-staining, low-odor sealant

Non-flammable

Brushable to 0°F

Contains PTFE

Contains no lead or harmful metals

Nontoxic

Nonstaining

Seals upon application

For use with potable water & other products including liquids & gases

Lowers friction

Low friction anti-seizable

Not classified as a marine pollutant

Not affected by contraction, expansion or vibration

Solid, dry-form lubricant

Molybdenum Disulphide (MoS2)

Reduces torque and power consumption

Lowers friction, prevents galling, seizure, stickslip, fretting, corrosion and metal-to-metal contact

Non-melting

High-Temp >750°F

Prevents corrosion

Water Resistant

Contains high percentage MoS2

Prevents Stick-Slip

Lowers Friction

NSF H-2 Registered

Non-flammable

Multipurpose

Non-evaporating

Contains no fluorocarbons

Never hardens or dries out

Contains no silicones

Aides in preventing galling

Air-cures at room temperature in 4 to 6 hours

Forms a durable, acid-free, corrosion-resistant finish

Provides a durable micro-thin coating of copper to machined surfaces

Paste-like, viscous lubricant for reducing friction and wear

Contains Moly and Graphite

No VOC's or ozone depleting solvents

“Stay-Put” characteristics

Rust-preventing additives

Moisture-resistant

Resists heat & pressure

Repeatable frictional characteristics

High temp complex grease

Resistance to make up downhole

Not considered a marine pollutant

Highly adhesive

Repeatable frictional characteristics

High temp complex grease

Resistance to make up downhole

Not considered a marine pollutant

Highly adhesive

Water displacing

Rust & corrosion resistant

Surface active

Semi-fluid for easy application

Easily flows into the thread roots for displacing moisture

Slightly over based to protect against acid fumes or oxidation

High strength fluid film

Extreme resistance to rust & corrosion

Strong adhesion properties

Pumpable

Timken load – 45 lbs

Highly synergistic blend of rust and oxidation inhibitors plus extreme pressure and anti-wear additives

NSF K-1 Registered

Ozone-friendly

Non-flammable

Non-staining

Low odor

Acid & alkali-free

Engineered to hold up to the rough conditions where they are used and the materials that are being applied.

4-1/2” Handle