• 1/4” Dr Sockets - 6 PT: 5/32”, 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16”, 1/2”

• 1/4” Dr Deep Sockets - 6 PT: 9/32", 5/16", 3/16", 1/4”

• 1/4” Dr Sockets - 6 PT (MM): 4, 5, 6

• 1/4” Dr Sockets - 12 PT: 3/16", 7/32", 5/16", 11/32", 3/8", 7/16”, 1/2”

• 1/4” Dr Deep Sockets - 12 PT: 1/4", 9/32"

• 1/4” Dr Sockets - 12 PT (MM): 7, 8, 9, 11, 12, 13

• 1/4” Dr Deep Sockets - 12 PT (MM): 10

• 3/8” Dr Sockets - 6 PT: 3/8”, 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

• 3/8” Dr Sockets - 6 PT (MM): 10, 11, 12, 13, 14, 15, 17, 19

• 3/8” Dr Sockets - 12 PT: 3/8", 7/16”, 1/2", 9/16", 5/8", 11/16", 3/4", 13/16"

• 3/8” Dr Deep Sockets - 12 PT: 3/8”, 7/16", 1/2", 9/16"

• 3/8” Dr Sockets - 12 PT: 9, 10, 11, 12, 13, 14, 15, 16, 17, 19

• 1/2” Dr Sockets - 12 PT: 1/2", 9/16", 5/8", 3/4", 13/16"

• 1/4" Dr, 3/8” Dr, 1/2” Dr Ratchets, 3/8" Dr 3" Extension, 3/8" Dr 5/8" Spark Plug 6 PT, 1/4" Dr, 3/8" Dr, 1/2" Dr Socket Clip, 6-1/4" & 9” Socket Bar, 19" Mechanic Box

• Sizes: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 1/2", 7/16", 9/16"

• 6-1/4" Socket Bar & Clips

• Sockets (MM): 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

• Deep Sockets (MM): 4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14

• 2" & 6” Extensions, Socket Driver, Universal Joint, Ratchet, Blow Molded Case

• Sizes: 3/16”, 7/32”, 1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 7/16”, 1/2”, 9/16”

• 6-1/4” Bar with Clips

• Sizes: 7/32", 1/4", 5/16", 3/8", 7/16", 1/2”, 9/16”, 9/32”, 11/32”

• 6-1/4" Socket Bar & Clips

• Sizes (MM): 5.5, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15

• 9” Socket Bar & Clips

• Sizes: 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", 5/16"

• 6-1/4" Socket Bar & Clips

• Sizes (MM): 2, 2.5, 3, 4, 5, 6

• 6-1/4” Socket Bar & Clips

• Sizes: T10, T15, T20, T25, T27, T30

• 6-1/4” Socket Bar & Clips

• 1/4” Dr

• 6 Point

• Full Polish

• 1/4” Dr

• Full polish finish

• Improves the ability to turn worn or rounded fasteners

• 1/4” Dr

• Chrome finish

• Made of heat-treated alloy steel

• 1/4” Dr

• Chrome finish

• Made of heat-treated alloy steel

• Bit holders have a hex opening to hold the bit, allowing the bit holder to take the full load of torque

• 24-tooth gear/floating pawl design provides 15° ratcheting angle

• Thin head design for access into tight work areas

• Reversing lever designed for quick, one-hand operation

• 1/4” Dr

• Pear head

• 45-tooth gear

• Black oxide finish

• Contoured handle

• 1/4” Dr

• Full Polish

• Head flexes 90° from horizontal

• Made of heat-treated alloy steel

• 1/4” Dr

• Full Polish

• 2” Overall Length

• 1/4” Dr Input

• Full Polish Finish

• 1/4” Dr

• Full polish finish

• Sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"

• 6-1/4” Socket Bar & Clips

• 12 Point

• 3/8” Drive

• 3/8” Dr

• 12 Point

• Full polish finish

• 3/8” Dr

• 8 Point

• Side locking hole

• Ball and spring design

• Smooth 360° rotation

• 6 Point

• 3/8” Dr

• Made using a heat-treated alloy

• 3/8” Dr

• Made using a heat-treated alloy

• 3/8” Dr

• Full Polish Finish

• Made from alloy steel

• 3/8” Dr Input

• Full Polish Finish

• 12 Point

• 3/8” Drive

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”

• 17" Socket Bar & Clips

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”

• 17” Socket Bar & Clips

• 1/2” Dr

• 6 Point

• Full Polish

• 1/2” Dr

• 6 Point

• Full Polish

• 1/2” Dr

• 12 Point

• Full Polish

• 1/2” Dr

• 12 Point

• Full Polish

• 1/2” Dr

• 6 Point

• 1/2” Dr

• 6 Point

• Side locking hole

• 1/2” Dr

• 12 Point

• 1/2” Dr

• 12 Point

• Side locking hole

• 1/2” Dr

• 8 Point

• Side locking hole

• Sizes: 1/4” - 5/8” Bits

• Socket Bar with Clips

• 1/2” Dr

• Polished chrome finish

• Made of heat-treated alloy steel

• 1/2" F x 3/4"M

• Full polish finish

• Use adapters to help increase or decrease drive end size

• Size stamped on tool

• Side locking hole

• 1/2” Dr

• Full polish finish

• Head flexes 90° from horizontal

• Made of heat-treated alloy steel

• Deep Sockets - 6pt: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”

• Sockets - 12pt: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2”, 2-1/8”, 2-3/16”, 2-1/4”, 2-3/8”

• 4”, 8", 16” Extension, Universal Joint, 20” Ratchet, 5-3/4” Hinge Handle, Sliding-T Handle, Set Box

• Sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

• 8" Extension, 20” Ratchet, 6-1/2” Set Box

• Sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-3/4”, 1-13/16”, 1-7/8”, 2”,

• 8" & 16” Extension, 20” Ratchet, 1/4” Dr Hinge Handle, 1/4” Dr Sliding-T Handle, 9-1/16” Set Box

• Sizes: 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 2”, 2-1/8”, 2-3/16”, 2-1/4”, 2-3/8”

• 4”, 8", 16” Extension, Universal Joint, 20” Ratchet, 5-3/4” Hinge Handle, Sliding-T Handle, Set Box

• Sizes: 3/4", 13/16", 7/8”, 5/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”

• Sizes: 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-3/16”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-9/16”, 1-5/8”

• 17” Socket Bar with Clips

• Sizes: 5/8”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”, 1-5/8”, 1-11/16”, 1-3/4”, 1-13/16”, 1-7/8”, 1-15/16”, 2”

• Sizes: 1-1/16”, 1-1/4”, 1-7/16”, 1-5/8”, 1-13/16”, 2”, 2-3/16”, 2-3/8"

• Sizes: 1”, 1-1/16”, 1-1/8”, 1-1/4”, 1-5/16”, 1-3/8”, 1-7/16”, 1-1/2”

• 3/4” Dr

• 6 Point

• Satin Finish

• Ball Detent Design

• 6 Point

• Stamped size for easy reference

• Side locking hole

• 3/4” Dr

• 12 Point

• Satin Finish

• 6 Point

• Stamped size for easy reference

• Side locking hole

• 6 Point

• Stamped size for easy reference

• Side locking hole

• 6 Point

• Stamped size for easy reference

• Side locking hole

• 12 Point

• Stamped size for easy reference

• Side locking hole

• 4 Point

• Stamped size for easy reference

• Side locking hole

• 8 Point

• Stamped size for easy reference

• Side locking hole

• 3/4” Dr

• Stamped size for easy reference

• Side locking hole

• Full Polish Finish

• Extensions give access to fasteners in areas otherwise impossible to reach

• 3/4” Dr

• 5/8” F x 3/4” M

• Full Polish Finish

• 2-1/2” Overall length

• 3/4” F x 1/2” M

• Full Polish Finish

• 1-7/8” Overall length

• 3/4” Drive size

• Full Polish Finish

• 4” Overall length

• 3/8” Dr

• Made of forged steel

• Size stamped on tool for easy identification

• Use adapters to help increase or decrease drive end size

• Use adapters to help increase or decrease drive end size

• Size stamped on tool

• Side locking hole

• 3/4” Dr

• Retaining rings are used to help secure sockets onto drive tools

• 24-tooth gear/floating pawl design provides 15° ratcheting angle

• Thin head design for access into tight work areas

• Reversing lever designed for quick, one-hand operation

• 3/4” Dr

• Pear Head

• Black Oxide Finish

• 24-Teeth

• Head Flexes 90° from horizontal

• Made of heat-treated alloy steel

• Chrome plated finish

• 3/4” Dr

• Full Polish Finish

• Made from alloy steel

• 20” Overall Length

• 1” Dr

• 12 Point

• Satin Finish

• 6 point

• Side locking hole

• Stamped size for easy reference

• 6 point

• Stamped size for easy reference

• Side locking hole

• 4 Point

• Stamped size for easy reference

• 1” F x 3/4” M

• Full Polish Finish

• Made of forged steel

• Use adapters to help increase or decrease drive end size

• 1” Dr

• Retaining rings are used to help secure sockets onto drive tools

• Corrosion resistant

• Slip resistant grip

• Extra wide jaw capacity

• Square jaw opening provides strength and tight fit

• Rugged I-beam style handle and reinforced stress areas

• Radius corner design

• Soft cushion grip for additional comfort

• Extra wide jaw capacity

• Square jaw opening provides strength and tight fit

• Non-reflective black oxide finish

• Square jaw opening provides strength and tight fit

• Extra wide jaw capacity

• Clik-Stop® locking design

• Satin finish

• Corrosion resistant

• Slip resistant grip

• Extra wide jaw capacity

• Sizes: 5/16", 3/8", 7/16", 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”

• Extra short size desirable for small or tight work spaces

• 11 piece combination wrench set

• Black oxide finish

• Sizes: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1", 1-1/16", 1-1/8", and 1-1/4"

• Non-reflective black oxide finish for use where non-plated products are required

• Anti-Slip Design (ASD) open end

• Sizes: 12 pt. 5/16”-1-1/4”

• Satin Finish

• Anti-Slip Design, Torque-Plus System

• Fits 4,8,12 pt. Fasteners

• Canvas Tool Roll-up

• Sizes: 1/4”, 5/16”, 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”

• Black Chrome Finish

• 6 Point

• Satin Finish

• 12 Point

• Satin finish

• Box end is chamfered

• 12 Point

• Black Oxide Finish

• Anti-Slip Design

• Anti-Slip Design open end

• 72 tooth gear allows for 5° arc swing

• Black chrome finish is corrosion-resistant

• Spline wrenches can be used on metric 4, 6, 12 point, spline and Torx fasteners

• Black chrome finish

• Anti-Slip Design open end

• 15° angled offset box end

• 72 tooth gear allows for 5° arc swing

• Full polish finish provides corrosion resistance

• Shorter length for access to confined workspaces

• The wrench self-aligns with the fastener

• 12 point box end allows for fine indexing

• Fits 4, 6 and 12 point fasteners

• Satin finish provides corrosion resistance and a slip resistant grip

• 12 point box end allows for fine indexing

• Fits 4, 6 and 12 point fasteners

• Box ends incorporate the TorquePlus™ system

• Non-reflective black oxide finish for use where non-plated products are required

• 12 point box end allows for fine indexing

• Fits 4, 6 and 12 point fasteners.

• Box ends incorporate the TorquePlus™ system

• 1/4” x 5/16”

• Full polish finish

• Sizes: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16”, 1”, 1-1/16”, 1-1/8”, 1-1/4”

• Full polish finish

• Sizes: 3/8”, 1/2”, 3/4”, 1”

• Removes broken threaded pipe ends pipe plugs and fittings

• Installation and removal without thread damage

• Made from hardened steel and plated

• Forged steel jaw

• Full floating hook jaw

• Fits any shape pipe

• Forged steel handle has deep milled teeth

• Chain capacity rating: 6,200 lbs

• Provides safe alternative to striking wrenches in confined spaces and on applications that prohibit sparking

• Wrench head offers access to recessed fasteners

• The handle can be attached to provide increased leverage for final tightening

• 12 Point

• Offset handle

• Heavy box walls

• Non-reflective black oxide finish

• 1/4” Dr

• 40-200 in-lbs

• Full polish finish

• 11-7/8” Overall length

• 3/4” Dr

• 60-300 ft-lbs

• Full polish finish

• 32-23/32” Overall length

• 3/4” Dr

• 120-600 ft-lbs

• Full polish finish

• 41-9/16” Overall length

• 3/4” Dr

• 160-800 ft-lbs

• Full polish finish

• 41-9/16” Overall length

• Chrome plated steel case is 5-1/4" long

• Black oxide bits are 4" long

• Sizes: 5/64” - 1/4” Regular Hex Keys

• 4-1/2” OA Length

• Black Oxide Finish (Keys)

• Non-reflective black oxide finish

• Used to tighten side slot nuts on collars, lock nuts and bearings

• Non-reflective black oxide finish

• Use to tighten side slot nuts on collars, lock nuts and bearings

• Similar to drift punches, but with wider points and heavier, shorter body

• For installing and removing pins and shafts

• To align holes in two or more pieces of metal through which a bolt or screw is to be inserted

• Provides a broad dent in marking intersecting center lines, hole locations, and pilot drill starting point

• One-piece design for strength and durability

• One-piece design for strength and durability

• Reverse taper to help prevent binding

• Black oxide finish

• Modified parabolic striking end

• Made from S2 steel and specially heat-treated

• Extractor Sizes: 1/8” - 1”

• Blow Molded Box

• Use tap holder or wrench on extractor to turn out broken part

• Size stamped on extractor refers to drill bit size to be used with that extractor

• 1/4” Dr

• 7-36 in-lbs

• 6-1/2” Overall Length

• Pocket clip

• 5-3/4” Overall length

• Induction hardened cutting edge

• Powerful leverage cuts heavy wire with ease

• Plastisol grips for added comfort

• Plastisol grips

• Diamond serrated jaws

• Jaws have offset rivet for increased leverage

• Designed for cutting No. 8 and other large wires

• Tip Size: 0.038

• Tip Angle: 45°

• Overall Length: 5-3/4”

• Tip Size: 0.090

• Tip Angle: 0°

• Overall Length: 9-1/4”

• Automatic spring return feature

• Reversible safety wire pliers provide right and left twist capability

• Provides all of the features of standard safety wire pliers

• Spark-resistant

• Head contains steel shot

• Fiberglass handle

Includes:

• 12” & 16” Rolling head pry bar

• 18” & 24” Aligning pry bar

• For prying, positioning, and aligning applications

• Large four-sided handle

• Tip width is 5/8th inch

• Chisel tip and smooth extended grip

• Tungsten file for spark plugs, distributors, and other electrical contact points

• Precision formed curves

• Large plastic handle

• Magnets feature enhanced holding power

• 2-9/16” Overall Length

• 10 Ton

• 3/4”-12 Acme

• 1” x 2” Oval mirror

• Versatile all-angle ball joint

• Telescoping handle

• With pocket clip

• 2-1/4” Mirror diameter

• Versatile all-angle ball joint

• Telescoping handle

• With pocket clip

• Lifts up to 1-1/2lbs

• Telescoping handle and all-angle ball joint

• Aluminum head that contains a neodymium magnet

• Pocket clip

• 1/2” Dr

• Replacement Bit Shaft

• 12 point box end

• Standard open end

• Compact shank design

• 15° angled offset box end

• Installation & removal without thread damage

• Can use with adjustable wrench for added torque

• Removes broken threaded pipe ends pipe plugs & fittings