Includes:

• 10" Flat Double Cut Bastard File

• 10" Flat Double Cut Smooth File

• 10" Half Round Double Cut Bastard File

• 10" Mill Single Cut Bastard File

• 10" Round Single Cut Bastard File

• 8" Number 4 File Card

• 7" Triangle Single Cut Slim Taper File

• 10" Square Double Cut Bastard File

Includes:

• 8" Mill Single Cut Bastard File

• 8" Mill Single Cut Smooth File

• 10" Mill Single Cut Bastard File

• 6" Triangle Single Cut Slim Taper File

Includes:

• 8" Flat Smooth Cut

• 10" Mill Bastard Cut

• 10" Flat Bastard Cut

• 10" Round Bastard Cut

• 10" Flat Smooth Cut

• 6" Slim Taper File

• 8" Half Round Bastard Cut

• 8" 4-in-Hand Rasp and File

• 10" Half Round Bastard Cut

Includes:

• 8" Mill Single Cut Bastard File

• 10" Mill Single Cut Bastard File

• 6" Triangle Single Cut Slim Taper File

• 8" Flat Double Cut Bastard File

• Bastard cut, American pattern flat file

• Rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots

• Double-cut on the sides for rough filing and single-cut on the edges for a smooth finish

• Bastard cut, American pattern flat file

• Rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots

• Double-cut on the sides for rough filing and single-cut on the edges for a smooth finish

• Bastard cut, American pattern flat file

• Rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots

• Double-cut on the sides for rough filing and single-cut on the edges for a smooth finish

• Bastard cut, American pattern flat file

• Rectangular cross section allows you to smooth and sharpen straight surfaces, while slight taper in width towards the file's point creates ease of access in slots

• Double-cut on the sides for rough filing and single-cut on the edges for a smooth finish

• American Pattern Flat File, Second Cut

• Rectangular in Cross Section and Taper Slightly Towards Point in Width

• Double Cut on Sides, Single Cut on Edges

• Used on concave, convex and flat surfaces

• Rounded on 1 side, flat on opposite

• Backs of all half-round bastard files are double-cut

• Flat sides of all half-round files are double-cut

• Used on concave, convex and flat surfaces

• Rounded on 1 side, flat on opposite

• Backs of all half-round bastard files are double-cut

• Flat sides of all half-round files are double-cut

• Used on concave, convex and flat surfaces

• Rounded on 1 side, flat on opposite

• Backs of all half-round bastard files are double-cut

• Flat sides of all half-round files are double-cut

• Used on concave, convex and flat surfaces

• Rounded on 1 side, flat on opposite

• Backs of all half-round bastard files are double-cut

• Flat sides of all half-round files are double-cut

• Used on concave, convex and flat surfaces

• Rounded on 1 side, flat on opposite

• Backs of all half-round bastard files are double-cut

• Flat sides of all half-round files are double-cut

• Used on Concave, Convex and Flat Surfaces

• Rounded on 1 Side, Flat on Opposite

• Single-cut on both sides

• Used for sharpening mill or circular saws

• Also for Draw-Filing and Finishing Metals

• Rectangular shape

• Single-cut on sides and edges

• Used for sharpening mill or circular saws

• Also for Draw-Filing and Finishing Metals

• Rectangular shape

• Single-cut on sides and edges

• Used for sharpening mill or circular saws

• Also for Draw-Filing and Finishing Metals

• Rectangular shape

• Single-cut on sides and edges

• Used for sharpening mill or circular saws

• Also for Draw-Filing and Finishing Metals

• Rectangular shape

• Single-cut on sides and edges

• Used for sharpening mill or circular saws

• Also for Draw-Filing and Finishing Metals

• Rectangular shape

• Single-cut on sides and edges

• Primarily used to file circular openings or concave surfaces

• Round shape

• All 4, 5, 6, 8, 10, 12“ files are single-cut

• Tapered slightly towards point

• Primarily used to file circular openings or concave surfaces

• Round shape

• All 4, 5, 6, 8, 10, 12“ files are single-cut

• Tapered slightly towards point

• Primarily used to file circular openings or concave surfaces

• Round shape

• All 4, 5, 6, 8, 10, 12“ files are single-cut

• Tapered slightly towards point

• Primarily used to file circular openings or concave surfaces

• Round shape

• All 4, 5, 6, 8, 10, 12“ files are single-cut

• Tapered slightly towards point

• Primarily used to file circular openings or concave surfaces

• Round shape

• All 4, 5, 6, 8, 10, 12“ files are single-cut

• Tapered slightly towards point

• American pattern round file, Second Cut

• Can be used to file circular openings or concave surfaces

• Single cut

• Slight taper in width

• Safe point on round files

• American pattern taper file

• Triangular shape

• Single cut

• Tapers slightly towards the point

• American pattern taper file

• Triangular shape

• Single cut

• Tapers slightly towards the point

• Slim, American pattern taper file

• 60° angle teeth

• Triangular shape

• Single cut

• Slim, American pattern taper file

• 60° angle teeth

• Triangular shape

• Single cut

• Slim, American pattern taper file

• 60° angle teeth

• Triangular shape

• Single cut

• Triangular shape

• Triangular shape

• Double extra slim, American pattern taper file

• 60° angle teeth

• Triangular shape

• Single cut

• Double extra slim, American pattern taper file

• 60° angle teeth

• Triangular shape

• Single cut

• Triangular shape

• Double-cut

• Sharp corners are slightly set and cut

• Cut to the point

• Triangular shape

• Double-cut

• Sharp corners are slightly set and cut

• Cut to the point

• American pattern file with knurl cut

• Tighten tension on chain to firmly support cutters when filing

• Place file against beveled cutting surface of teeth 20° to 45° with saw

• File from inside to outside of cutter

• American pattern farrier's handy rasp, tanged

• Rectangular shape

• Single cut on edges

• Comfortable cushion grip at point and handle

• Rasp teeth on 1 side, file teeth on opposite

• Used to restore damaged or worn external threads on bolts, pipes, etc.

• Each thread restoring file will work with 8 different thread sizes

• Color caps on tubes

• Type 8 blue cap: metric bolt; .80, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00mm

• Metal Ferruled Wooden Handle

• Made From Close Grain Hardwood with Wax Finish

• Handles Have Strong Nickel-Plated Metal Ferrules

• Metal Ferruled Wooden Handle

• Made From Close Grain Hardwood with Wax Finish

• Handles Have Strong Nickel-Plated Metal Ferrules

• One side of the tool is a rasp

• Opposite Side is Magicut file

• Maximum Cutting Surface Design

• Single Cut on Edges

• Rectangular Shape

• Rasp Cut is 6 Teeth Per Row

• 4-in-1 combination file and wood rasp

• Includes two types of rasps and two files

• Half-round wood rasp

• Flat wood rasp for rapid stock removal

• Machine milled for precise material removal

• American pattern rasp

• Bastard cut

• Half round file

• Tanged design integrates Nicholson adjustable handle

Includes:

• (4) 10" bastard cut files

• (2) 6" tapered files

• (2) 8" bastard cut files

• (1) 12" mill bastard cut file

• Rounded on one side, flat on the other

• Used on concave, convex and flat surfaces

• Single cut

• File set for general sharpening and maintenance

• Sizes 6” to 10”

Includes:

• (1) Half Round, (1) Flat, (1) Mill, (1) Regular Taper, (1) Round, (1) Square, (1) Vinyl pouch

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Great for “hogging” or rapid stock removal

• Double cut on both sides, single cut on the edges

• Exclusive “wavy tooth” design

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Superb for rounding out holes, corners and crevices

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• For aggressively filing weld beads and scale off pipe

• Double cut on both sides

• Built-in "twist & roll" action on the half round side

• "Spiral cut" design and "wavy tooth" design on the flat side

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• Intended for enlarging and rounding out circular openings or concave surfaces

• Round Files are double cut and taper toward the point in width and thickness

• For sharpening and maintaining proper tooth shape on chain saw

• Round Chain Saw Files have a fast, smooth cutting action that leaves an excellent "keen" edge cutting finish

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Excellent for a wide range of applications such as sharpening, draw filing, lathe work and general shop use

• Single cut on the sides and edges, and taper towards the point in width

• Single-cut coarse tooth files that taper toward the point in width

• Diamond pattern "double chip-breaker" allowing for fast stock removal while leaving a smooth finish

• Combines the performances of Flat and Mill Files

• Single-cut coarse tooth files that taper toward the point in width

• Diamond pattern "double chip-breaker" allowing for fast stock removal while leaving a smooth finish

• Combines the performances of Flat and Mill Files

• For use on slots, key ways and acute angles

• double cut on both sides, single cut on the "knife edge" with a safe (uncut) back and taper toward the point in width and thickness

• "Wavy tooth" design

• For use on slots, key ways and acute angles

• double cut on both sides, single cut on the "knife edge" with a safe (uncut) back and taper toward the point in width and thickness

• "Wavy tooth" design

• For use on slots, key ways and acute angles

• double cut on both sides, single cut on the "knife edge" with a safe (uncut) back and taper toward the point in width and thickness

• "Wavy tooth" design

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Designed for filing all types of saws with 60° angle teeth

• Triangular in shape, have cut edges and taper toward the point in width and thickness

• Excellent for cleaning out corners or for use on cutters, taps and flat surfaces

• Double cut and taper toward the point in width and thickness

• "Wavy tooth" design

• Excellent for cleaning out corners or for use on cutters, taps and flat surfaces

• Double cut and taper toward the point in width and thickness

• "Wavy tooth" design

• Excellent for cleaning out corners or for use on cutters, taps and flat surfaces

• Double cut and taper toward the point in width and thickness

• "Wavy tooth" design

• Excellent for cleaning out corners or for use on cutters, taps and flat surfaces

• Double cut and taper toward the point in width and thickness

• "Wavy tooth" design

• Used for slots, corners, and narrow openings

• Double cut on the sides, single cut on the edges, and are parallel in width and thickness

• For cleaning contact points in magnetos, switches, electric bells, and distributor points and spark plugs in engines

• Double cut

• Includes: 8” Mill Bastard, 8” Square Bastard, 8” Round Bastard, 8-1/2” Round Bastard, 8” Multi-Kit, Canvas Pouch

• Includes: 10” Flat Bastard, 10” ½ Round Bastard, 10” Round Bastard, 10” Mill Bastard, 10” Square Bastard, 10” Flat Smooth, 10” Hobby Rasp, 7” Slim Taper, File Card Cleaner, 1 Canvas Pouch

Includes:

• 8” Mill Bastard, 8-1/2” Round Bastard, 8” Multi-Kut, 8” Square Bastard, 8” Round Bastard, 1 Plastic Pouch

• Threaded insert

• Easy on and easy off

• Reusable and long lasting

• Threaded insert

• Easy on and easy off

• Reusable and long lasting

• Threaded insert

• Easy on and easy off

• Reusable and long lasting

• Threaded insert

• Easy on and easy off

• Reusable and long lasting

• Threaded insert

• Easy on and easy off

• Reusable and long lasting

• Single-cut mill pattern

• Bastard teeth spacing

• For cutting angles less than 90°

• Triangle file with gradually tapered

• Single-cut mill pattern

• Bastard teeth spacing

• For cutting angles less than 90°

• Triangle file with gradually tapered

• Single-cut mill pattern

• Bastard teeth spacing

• For cutting angles less than 90°

• Triangle file with gradually tapered

Includes:

• 8" Mill Bastard File, 6" Round File, 6" Slim Taper File, 8" 4-in-1 File and 1 Interchangeable Handle

• Needle files for small precision filing projects

• Smooth pattern for light removal of material

• All Files are 4" long