Temperature Range: -65ºF to 375ºF

Pressure Range: Seals to 10,000 PSI

Forms a tough, insoluble, vibration-proof seal

High-speed curing time without shrinkage

Soft-setting, non-toxic, PTFE paste

Remains pliable in cold temperatures

Temperature Range: -100ºF to 600ºF

Pressure Range: 10,000 PSI sealing liquids; 3,000 PSI sealing gases

For alcohol blended gasoline (ethanol)

Remains pliable in cold temperatures

Non-hardening, non-toxic paste with PTFE

Use on threaded brass, copper, stainless steel, aluminum, black pipe, PVC nylon and galvanized pipe threads, hoses

Remains pliable in cold temperatures

Non-hardening, non-toxic paste with PTFE

Use on threaded brass, copper, stainless steel, aluminum, black pipe, PVC nylon and galvanized pipe threads, hoses

Remains pliable in cold temperatures

Non-hardening, non-toxic paste with PTFE

Use on threaded brass, copper, stainless steel, aluminum, black pipe, PVC nylon and galvanized pipe threads, hoses

DO NOT use in oxygen systems

Temperature Range: -250ºF to 500ºF

High viscosity, heavy-duty, non-toxic PTFE thread sealant

Pressure Range: 2,000 PSI for gases; 10,000 PSI for liquids

Blue, textured, non-PTFE, grit-free sealant

Use on most metals and plastic

Temperature Range: -50ºF to 400ºF

Pressure Range: To 10,000 PSI sealing liquids

Pressure Range: 3,000 PSI sealing gases

No lead

Nontoxic

Nonstaining

Contains PTFE

Safe for portable water lines

Seals badly worn threads

Greatly increases connection life

Provides protection against galling and wear

* H₂S Inhibited

Non-metallic

Non-volatile

Solvent-free

Lubricates for tighter makeup with less torque

Brushable

Non-hardening

Contains no metallic additives

Will not run, drip, or settle out

May be used on both ferrous and Non-ferrous metals

Lubricants and seals

Brushable

Non-hardening

Contains no metallic additives

Will not run, drip, or settle out

May be used on both ferrous and Non-ferrous metals

Lubricants and seals

NSF P-1 Registered

Allows immediate pressurization

Non-petroleum based

Contains PTFE and natural fillers

Water-resistant

Non-flammable

Low odor

NSF P-1 Registered

Allows immediate pressurization

Non-petroleum based for use with potable water

Contains PTFE and natural fillers

Water-resistant, non-staining, low-odor sealant

Non-flammable

Brushable to 0°F

NSF P-1 Registered

Non-petroleum based

Contains PTFE and natural fillers

Water-resistant

For use with potable water

Non-flammable

Low odor

NSF P-1 Registered

Non-petroleum based

Contains PTFE and natural fillers

Water-resistant

For use with potable water

Non-flammable

Low odor

Contains PTFE

Contains no lead or harmful metals

Nontoxic

Nonstaining

Seals upon application

For use with potable water & other products including liquids & gases

Contains no lead or harmful metals

Safe for use on potable water lines

Contains PTFE

Seals upon application

Nontoxic

Nonstaining

Contains additives for protection against rust, corrosion, and oxidation

Prevents leakage (seals to 10,000 psi)

High film strength to protect against wear, galling, and seizure

H₂S Inhibited

Sticks to wet and oil steel

Contains additives for protection against rust, corrosion and oxidation

Prevents leakage (seals to 10,000 psi)

High film strength to protect against wear, galling, and seizure

H₂S Inhibited

Enhanced rust inhibiting properties

Contains additives for protection against rust, corrosion & oxidation

Prevents leakage (seals to 10,000 psi)

High film strength

H₂S Inhibited

Sticks to wet & oily steel, ensuring the compound will not wash off threads

Non-toxic to non-drying

Easily washes off hands & clothing

Sealing temperature 50°F to 500°F

Working Pressure: 3000 PSI (Gas), 10,000 PSI (Liquids)

Non-toxic to non-drying

Easily washes off hands & clothing

Sealing temperature 50°F to 500°F

Working Pressure: 3000 PSI (Gas), 10,000 PSI (Liquids)

Non-toxic to non-drying

Easily washes off hands & clothing

Sealing temperature 50°F to 500°F

Working Pressure: 3000 PSI (Gas), 10,000 PSI (Liquids)

Non-toxic to non-drying

Easily washes off hands & clothing

Sealing temperature 50°F to 500°F

Working Pressure: 3000 PSI (Gas), 10,000 PSI (Liquids)

Lubricates and protects nuts and bolts

Resists galling, rust and corrosion

Working temperature: to 1800° F

Formulated for extra lubrication on metal pipe threads

Slow-drying, soft-setting, non-hardening compound

Will not harden or separate in the can

Pressure rating of up to 10,000 PSI for liquids

Low-Odor

Non-toxic & grit free

Adheres to oily threads

Slow-drying soft-set formula

Non-toxic and grit free

Non-hardening, slow-drying soft-set formula

Formulated with PTFE resin

Specially formulated for extra lubrication

Slow-drying, soft-setting, non-hardening compound

Applies evenly and quickly to threads

Will not harden or separate in the can

Pressure rating of up to 6,000 PSI for liquids

Slow-drying, soft-setting, non-hardening compound

Applies evenly and quickly to threads

Will not harden or separate in the can

Pressure rating of up to 6,000 PSI for liquids

Effective at temperatures up to 2600°F

Made of pure nickel powder and graphite flake

Helps prevent, rusting, seizing, welding, or galling

Will not contaminate catalyst beds, reaction chambers, or special alloy fittings

Effective at temperatures up to 2600°F

Made of pure nickel powder and graphite flake

Helps prevent, rusting, seizing, welding, or galling

Will not contaminate catalyst beds, reaction chambers, or special alloy fittings

Prevents rust and corrosion

Will not bleed, separate or settle

Effective at temperatures up to 1800°F

Specially formulated copper-based thread sealant

Prevents seizing, galling and corrosion under extreme conditions

Prevents rust and corrosion

Will not bleed, separate or settle

Effective at temperatures up to 1800°F

Specially formulated copper-based thread sealant

Prevents seizing, galling and corrosion under extreme conditions

Premium grade lubricant

Non-drying anti-seize lubricant

Allows for easy disassembly

Does not contain any solvents, metal, lead, graphite, or clay fillers

Not for use on oxygen

Easy cleanup and has indefinite shelf life

Specially formulated for fire sprinkler systems

Does not harden

Stay-Soft is non-seizing

Easy cleanup and has indefinite shelf life

Does not harden and allows for prefab application to threads

Stay-Soft is non-seizing and allows for easy disassembly

Fast Set, One-Step Cement

Suitable for All Weather Conditions

Effective on Wet or Dry Pipe

Great for Flexible PVC Pipe

Eco-Friendly - Low VOC